What will work in the end
Every day at 19:00, the selected lamp will turn on. You can adjust the time later to suit your needs.
What you need
A working Home Assistant and a connected lamp or a supported smart plug with a lamp. First, verify that you can manually turn it on from the dashboard. The plug must have the lamp's regular switch turned on.
Steps
- Open Settings → Automations & Scenes.
- Select to create a new automation and start with an empty rule.
- Add a Time trigger and set it to
19:00:00. - Add an 'on' action. For a smart bulb, select turning on the light; for a plug, select turning on the switch.
- As the target, select your lamp or plug.
- Save the rule under the name Evening lamp.
Button names may vary slightly depending on the language and version. A trigger means "when something happens," and an action means "what the home should do."
Test the result
First, run the rule's action manually. Then, set the time a few minutes into the future, turn off the lamp, and wait. This will also verify the time-based triggering. Finally, reset it to 19:00.
If the lamp doesn't turn on
Check if manual control works, if the correct target is selected, and if the rule is enabled. Also, verify the home's time zone.
What you can add
A second similar rule can turn the lamp off in the evening. Start with a simple fixed time and only consider presence-based conditions afterwards.
