HA wiki Search ↗
Intermediate · 6-minute read

Voice Preview Edition: Czech commands and announcements

Add Voice Preview Edition to Home Assistant, configure Czech speech and create an announcement automation with a complete YAML example.

Sources checked: · Based on documentation

Voice Preview Edition can understand Czech commands and speak Czech when its voice assistant is configured accordingly. It can also announce an open window automatically. This procedure uses Home Assistant Cloud from Nabu Casa for speech recognition and a Czech voice. A subscription is required after the trial period, and speech processing needs an internet connection. Cloud processing is not compulsory, but local processing requires a custom setup and a sufficiently powerful server.

1. Add the device

Prepare an up-to-date Home Assistant installation, Voice Preview Edition, a USB-C cable, a power supply and the password for a 2.4 GHz Wi-Fi network. On your phone, install the latest Home Assistant app and have an administrator login ready. Enable Bluetooth and grant the permissions required to discover devices.

  1. Connect the device to power and open the Home Assistant app.
  2. Under Settings → Devices & services, open the discovered Improv via BLE device. Choose to add it and enter the 2.4 GHz Wi-Fi details.
  3. When prompted, press the middle button to confirm the connection.
  4. After the device joins Wi-Fi, add the discovered Home Assistant Voice through the ESPHome integration. Complete the wizard, install any offered update and select a voice assistant.

Do not add the Assist Satellite integration separately. The device provides the relevant entity through ESPHome.

2. Configure Czech

Connect Home Assistant to Nabu Casa under Settings → Home Assistant Cloud. Then open Settings → Voice assistants and configure a Home Assistant Cloud assistant under Assist. Give it a clear name such as Czech.

Set the assistant language to Czech and the conversation agent to Home Assistant. Select Home Assistant Cloud with Czech for both Speech-to-text and Text-to-speech, then choose an available Czech voice. Changing the user-interface language alone is not enough.

Under Settings → Devices & services → ESPHome, open Voice Preview Edition and assign the Czech assistant using its voice-assistant selection control. The device also uses this voice for announcements. Czech commands use speech recognition and Assist; Czech announcements use text-to-speech (TTS). You do not need to speak into the microphone for an announcement.

3. Test an announcement

On the device page, find the entity beginning with assist_satellite. and copy its ID. In Developer tools → Actions, select assist_satellite.announce, target that entity and enter a short Czech test message. Run the action. The preannounce option plays a sound before the message and is enabled by default.

If you hear nothing, check the volume, entity availability, assigned assistant and its Czech TTS configuration. Also check the internet connection and the device's connection to Home Assistant.

4. Add the announcement to an automation

Under Settings → Automations & scenes, create an empty automation and choose Edit in YAML. Paste the complete example below. Replace both entity IDs: the window contact must use the on state, and the target must be your Assist Satellite entity.

alias: Voice announcement for open window
triggers:
  - platform: state
    entity_id: binary_sensor.window
    to: "on"
    for: "00:10:00"
condition: []
action:
  - service: assist_satellite.announce
    target:
      entity_id: assist_satellite.home_assistant_voice
    data:
      message: "The window has been open for ten minutes."
      preannounce: true
mode: single

You can add the same action visually under Action → Add action. Search for assist_satellite.announce, select the device and enter the message. Add it after the existing steps in an automation. The ten-minute wait resets if Home Assistant restarts or automations are reloaded.

Sources

What next

Related guides